If you are using a version lower than 2.0.0 go here.
In this page:
Step 1 - Requirements
iOS Mobile App & Xcode |
---|
P12 file & password or P8 File. Click here to create a P12 file. Click here to create a P8 file. |
AppAlias (You can get it from RMC Panel) If you do not have an account, our sales representatives will contact you. Click here. |
Step 2 - Installation
2.1 Euromsg is available through CocoaPods. To install it, simply add the following line to your Podfile
pod 'Euromsg', '>= 2.0.0'
Step 3 - Add Application to RMC Panel
First, create your application from the RMC Panel. App Alias section should be unique to you. RMC makes the distinction based on this value.
Step 4 - Usage
Add a Notification Service Extension
NotificationServiceExtension allows your iOS application to receive rich notifications with images, buttons, and badges. It's also required for Euromessage's analytics features.
In Xcode File > New > Target...
Select Notification Service Extension then press Next.
Enter the product name as NotificationService and press Finish.
Do not select Activate on the dialog that is shown after selecting Finish.
By canceling, you are keeping Xcode debugging your app, instead of the extension you just created.
If you activated by accident, you can switch back to debug your app within Xcode (next to the play button).
In the project navigator, select the top-level project directory and select the NotificationSerivce target in the project and targets list. Unless you have a specific reason not to, you should set the Deployment Target to be iOS 11.
Open NotificationService.swift and replace the whole file's contents with the following code.
import UserNotifications import Euromsg class NotificationService: UNNotificationServiceExtension { var contentHandler: ((UNNotificationContent) -> Void)? var bestAttemptContent: UNMutableNotificationContent? override func didReceive(_ request: UNNotificationRequest, withContentHandler contentHandler: @escaping (UNNotificationContent) -> Void) { self.contentHandler = contentHandler bestAttemptContent = (request.content.mutableCopy() as? UNMutableNotificationContent) Euromsg.configure(appAlias: "YOUR_APP_ALIAS", enableLog: true) Euromsg.didReceive(bestAttemptContent, withContentHandler: contentHandler) } override func serviceExtensionTimeWillExpire() { guard let contentHandler = self.contentHandler else { return; } guard let bestAttemptContent = self.bestAttemptContent else { return; } contentHandler(bestAttemptContent) } }
Add a Notification Content Extension
Note: If you are going to use carousel push sending, you need to add this.
In Xcode File > New > Target...
Select Notification Content Extension then press Next.
Enter the product name as NotificationContent and press Finish.
Do not select Activate on the dialog that is shown after selecting Finish.
By canceling, you are keeping Xcode debugging your app, instead of the extension you just created.
If you activated by accident, you can switch back to debug your app within Xcode (next to the play button).
In the project navigator, select the top-level project directory and select the NotificationContent target in the project and targets list. Unless you have a specific reason not to, you should set the Deployment Target to be iOS 11.
Delete MainInterface.storyboard and NotificationContent.swift files. Then create a swift file named EMNotificationViewController under the NotificationContent folder. Make sure the info.plist file is the same as in this link.
Don't Create Objective-C Bridging Header
Open EMNotificationViewController.swift and replace the whole file's contents with the following code
import UIKit import UserNotifications import UserNotificationsUI import Euromsg @available(iOS 10.0, *) @objc(EMNotificationViewController) class EMNotificationViewController: UIViewController, UNNotificationContentExtension { let appUrl = URL(string: "euromsgExample://") let carouselView = EMNotificationCarousel.initView() var completion: ((_ url: URL?, _ userInfo: [AnyHashable: Any]?) -> Void)? func didReceive(_ notification: UNNotification) { carouselView.didReceive(notification) } func didReceive(_ response: UNNotificationResponse, completionHandler completion: @escaping (UNNotificationContentExtensionResponseOption) -> Void) { carouselView.didReceive(response, completionHandler: completion) } override func loadView() { completion = { [weak self] url, userInfo in if let url = url { self?.extensionContext?.open(url) if url.scheme != self?.appUrl?.scheme, let userInfo = userInfo { Euromsg.handlePush(pushDictionary: userInfo) } } else if let url = self?.appUrl { self?.extensionContext?.open(url) } } carouselView.completion = completion //Hangi öğenin seçildiğini izlemek istiyorsanız ekleyin carouselView.delegate = self self.view = carouselView } } /** Hangi carousel öğesinin seçildiğini izlemek istiyorsanız ekleyin */ extension EMNotificationViewController: CarouselDelegate { func selectedItem(_ element: EMMessage.Element) { print("Selected element is => \(element)") } }
The podfile file should be as follows. Then go to the project path through the terminal, type pod install and press enter.
target 'YOUR_PROJECT_NAME' do # Comment the next line if you don't want to use dynamic frameworks use_frameworks! pod 'Euromsg' post_install do |installer| installer.pods_project.targets.each do |target| if target.name == 'Euromsg' target.build_configurations.each do |config| config.build_settings['APPLICATION_EXTENSION_API_ONLY'] = 'No' end end end end # Pods for RelatedDigital end target 'NotificationService' do # Comment the next line if you don't want to use dynamic frameworks use_frameworks! pod 'Euromsg' # Pods for RelatedDigital end target 'NotificationContent' do # Comment the next line if you don't want to use dynamic frameworks use_frameworks! pod 'Euromsg' # Pods for RelatedDigital end
Adding App Groups
After completing all of them, you need to add App Groups to Targets.
Add App Groups under Signing & Capabilities respectively in Targets marked on the left in the image. Type the App Groups name as group.YOUR_APP_BUNDLE_IDENTIFIER.relateddigital
AppDelegate.swift
Firstly import Euromsg and UserNotifications
import Euromsg import UserNotifications
Add UNUserNotificationCenterDelegate to the class AppDelegate section.
class AppDelegate: UIResponder, UIApplicationDelegate, UNUserNotificationCenterDelegate
Provisional Push
If you want to get provisional push permission, add the following code to didFinishLaunchingWithOptions. For iOS 12 or older version users, this function will work as askForNotificationPermission.
UNUserNotificationCenter.current().delegate = self Euromsg.configure(appAlias: "YOUR_APP_ALIAS", enableLog: true) Euromsg.registerForPushNotifications() Euromsg.askForNotificationPermissionProvisional() if #available(iOS 13, *) { // handle push for iOS 13 and later in sceneDelegate } else if let userInfo = launchOptions?[UIApplication.LaunchOptionsKey.remoteNotification] as? [String: Any] { Euromsg.handlePush(pushDictionary: userInfo) }
If you do not want to get provisional push permission, add the following code to didFinishLaunchingWithOptions.
UNUserNotificationCenter.current().delegate = self Euromsg.configure(appAlias: "YOUR_APP_ALIAS", enableLog: true) Euromsg.registerForPushNotifications() Euromsg.askForNotificationPermission() if #available(iOS 13, *) { // handle push for iOS 13 and later in sceneDelegate } else if let userInfo = launchOptions?[UIApplication.LaunchOptionsKey.remoteNotification] as? [String: Any] { Euromsg.handlePush(pushDictionary: userInfo) }
User has to accept to receive push messages. If the user accepts and the device is successfully registered to the APNS, the following method is called in AppDelegate
func application(_ application: UIApplication, didRegisterForRemoteNotificationsWithDeviceToken deviceToken: Data) { Euromsg.registerToken(tokenData: deviceToken) }
In order for push reports to be reflected on RMC, you need to add the following functions.
func application(_ application: UIApplication, didReceiveRemoteNotification userInfo: [AnyHashable : Any]) { Euromsg.handlePush(pushDictionary: userInfo) } func application(_ application: UIApplication, didReceiveRemoteNotification userInfo: [AnyHashable : Any], fetchCompletionHandler completionHandler: @escaping (UIBackgroundFetchResult) -> Void) { Euromsg.handlePush(pushDictionary: userInfo) } func userNotificationCenter(_ center: UNUserNotificationCenter, willPresent notification: UNNotification, withCompletionHandler completionHandler: @escaping (UNNotificationPresentationOptions) -> Void) { completionHandler([.alert, .badge, .sound]) } func userNotificationCenter(_ center: UNUserNotificationCenter, didReceive response: UNNotificationResponse, withCompletionHandler completionHandler: @escaping () -> Void) { Euromsg.handlePush(pushDictionary: response.notification.request.content.userInfo) completionHandler() }
SceneDelegate.swift
func scene(_ scene: UIScene, willConnectTo session: UISceneSession, options connectionOptions: UIScene.ConnectionOptions) { // Use this method to optionally configure and attach the UIWindow `window` to the provided UIWindowScene `scene`. // If using a storyboard, the `window` property will automatically be initialized and attached to the scene. // This delegate does not imply the connecting scene or session are new (see `application:configurationForConnectingSceneSession` instead). guard let _ = (scene as? UIWindowScene) else { return } if #available(iOS 13, *), let userInfo = connectionOptions.notificationResponse?.notification.request.content.userInfo { Euromsg.handlePush(pushDictionary: userInfo) } }
Send Information to RMC
Run the code below when the user successfully logs in, registers and the first time the application is opened.
In order for your data from the mobile channel to be uploaded to RMC, please pay attention that whatever reference value you have used in your active RMC account (KEY_ID * or E-Mail) comes from the mobile channel with this reference.
*KEY_ID: These are the id values used by the application owner to deduplicate the customer. These can be expressed with different names such as CRMid, userid, customerid, accountid.
Euromsg.setEmail(email: "test@relateddigital.com", permission: true) Euromsg.setEuroUserId(userKey: "1234567890") Euromsg.sync()
IYS Email Register
Add it just before Euromsg.sync() code.
Euromsg.registerEmail(email: "example@email.com", permission: true) //You can also call TACIR account as following Euromsg.registerEmail(email: "example@commercial.com, permission: true, isCommercial: true)